View 597-7741-207F_4236733.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

light pipe selector guide optopipe ? lightpipes
why light pipes? visual status indication provides for safe and reliable operation of electrical equipment, instruments, and electronic devices and also serves diagnostic purposes as well. while lamp holders, which utilize sepa- rate incandescent or neon bulbs and lens caps, dominated the market in the majority of the 20th cen- tury, led-based light sources are predominantly used today to provide visual indication. technical solutions light-pipes provide front-panel indication where: ? traditional indicators are too large or other space constraints exist ? indication is required over, around, or beneath front-panel components ? emi/rfi concerns require location of the light source away from the front-panel ? indication is desired after all mechanical design considerations were made we also design light-pipes for non-diagnostic applications, including lighted company logos. light loss between the led and light-pipe interface must be considered and there is also additional transmission loss through the pipe or wherever there is a bend. the shape of the light-pipe also influences the output. dialights design engineers will recommend the best led for use with each light-pipe. configuration and features almost any configuration or size can be accommodated and we currently offer standard solutions in: mounting consideration most light-pipes are mounted to a pcb by pressing into holes drilled into the pcb. depending on the appli- cation, epoxy is also indicated for additional support. some light-pipes are designed to press into the front-panel and rest on the pcb, just above the led(s). heat-staking is another process that is used to mount light-pipes in specific applications. index 02 product overview optopipe ? lightpipes 04 pcb mount single position horizontal 06 pcb mount multiple position vertical 08 pcb mount multiple position horizontal 14 panel mount single position 15 panel mount multiple position micro led ? leds 16 recommended micro led? surface mount leds new products 18 optopipe? light pipe actuator extensions the following pages are organized as a product overview. additional information including detailed specs, are available at: ww w.dialight.com. the most recent version of this selector guide can be found at: www.dialight.com/assets/brochures_and_catalogs/indication/lightpipe_selector_guide.pdf 40 years of led experience single element round lens vertical shielded over rs-232 multiple element square lens horizontal textured lens over sfp cage single row rectangular lens vertical right angle polished lens under pcb mount multiple row illuminated corner horizontal right angle 2
typical applications ? data center infrastructure ? servers - rack mount; blade; tower ? storage C high-performance storage subsystems for high- end enterprise ? networking equipment for enterprise data centers and telecom communication centers ? switches, routers, and network control equipment interconnected using fiber optic and high speed wiring ? storage networking hardware ? fiber channel host bus adapter cards (hbas); converged network adapter cards (cnas);\iscsi adapter cards; infiniband adapter cards ? next-gen wireless ? wireless infrastructure ? electronic test & measurement instruments ? communications testing equipment ? process controls ? automation ? medical ? handheld devices dialight optopipes? dialights expertise in led indication and lighting is apparent in our line of engineered light-pipes. dialight has been a leading manufacturer of lightpipes for network communication and electronic equipment for more than 10 years. our 200 standard and custom solutions are complemented by new designs resulting from customer requirements or market developments. dialights optical and mechanical engineers use the latest modeling tools to develop mechanical and optical simulations that ensure expected performance of the design. slas are available to represent the physical and optical characteristics of the design. dialight also has an extensive optics lab for post-design measurement and analysis. with various single and multiple position products for either panel mount or pcb mount oriented lightpipes already in production, we also have the added capability to manufacture custom solutions to meet your specific requirements. features and benefits ? impervious to failure due to shock and vibration ? up to 90% more efficient than traditional light sources when delivering monochromatic light ? low-voltage and minimal power consumption ? light is produced through photonic emission, not as a by-product of a radiating heat source ? molded from rohs compliant ul94-v0 water clear polycarbonate with an oxygen index of 35%. to compliment our wide range of lightpipes, dialight is also the worldwide leader in applied led technology including circuit board and panel mount indicators, surface mount leds, led signaling products for the transportation industry and led lighting fixtures for industrial users. dialights lightpipes are available through our extensive line of sales repre- sentatives and distributors world-wide. for a complete listing that includes the ability to check stock status at our distribution partners, please visit our website at www.dialight.com. the most current version of this catalog will always be availble at: www.dialight.com/assets/brochures_and_catalogs/indication/lightpipe_selector_guide.pdf 3
part number drawing suggested led * 597-3xx1-207f 597-77x1-207f 597-3xx1-207f 597-77x1-207f 597-3xx1-207f 597-77x1-207f 597-3xx1-207f 597-77x1-207f 597-3xx1-207f 597-77x1-207f 597-3xx1-207f 597-77x1-207f 515-1001f 515-1011f 515-1038f 515-1039f 515-1049f 515-1054f 4 pcb mount single position horizontal .420.005 (10,670,12) .245 (6,22) .150 (3,81 ) .066 (1,68) .095 (2,41) .719 (18,26) .006 (0,15) .479 (12,17) .118.005 (30,12) .624 (15,85) .642 (16,31) .109 (2,77) .240 (6,1) .262 max panel thickness .216.005 (5,490,12) .575 .160 .345 .092 .085 .250 charmille #24 finish .190 ? .190 .066 .050 pin #1 .155 .095 .462 (11,73) ?.230.005 (5,840,12) .230 (5,84) .320.005 (8,130,12) .21 (5,3) .43 (10,9) .100 (2,54) .173.005 (4,390,12) .346.005 (8,790,12) ?.116 mounting pins typ (2 plcs) curved & diffused front surface .293 (7,44) .876 (22,25) .15 (3,8) .30 (7,6) ?.116 mounting pins (2) places .346 .007 .173 .005 .10 .20 .882 1.00 ?.230 .230 .46 front panel .88 .150 .703 1.00 .300 ?.140.007 (3,560,17) .140 (3,56) .095 (2,41) ?.079 (nom) mounting pins typ: 2 plcs .106.007 (2,690,17) .117.007 (2,970,17) .340 (8,64) .290 (7,37) .65 (16,6) (ref) .21 (5,3) (ref) .270 (6,86) .095 (2,41) .062 p .c. board front panel .11 ?.079; 2 plcs .350 .350 .450 .03 .063 .090 .065 .170 .300 .045 .200 .130 .080 * x represents a variable part number. see page 17 for led details.
part number drawing suggested led * 597-3xx1-507f 597-77x1-507f 597-3xx1-207f 597-77x1-207f 597-3xx1-507f 597-77x1-507f 597-3xx1-507f 597-77x1-507f 597-3xx1-207f 597-77x1-207f 597-3xx1-207f 597-77x1-207f 515-1105f 515-1111f 515-1135f 515-1136f 515-1141-195f 515-1142-195f 5 .157 (3,99) .075 (1,91) .128 (3,24) .122 (3,1) .157 (3,99) .014 (0,36) .308 (7,82) ?.063 (1,6) .096 (2,44) .170 (4,33) .170 (4,32) led ? .115 (2,93) .062 (1,57) .700 (17,78) .614 .394 .380 led ? .100 typ. .145 .289 .125 .100 r .20 2.061 .113 .050 2.074 .100 .563 .100 .096 (2,44) .110 (2,79) .170 (4,32) .45 2.369 (60,17) .615 (15,62) .155 .155 .250 (6,35) .400 (10,16) .070 (1,78) .291 (7,39) .185 (4,7) .475 (12,07) .110 (2,79) .096 (2,44) 2.369 (60,17) 45 .170 (4,32) .615 (15,62) polished 2 155 155 .250 (6,35) .400 (10,16) .070 (1,78) .291 (7,39) .185 (4,7) .475 (12,07) .13 (3,3) .078.003 (1,980,07) .156 (3,96) .157 (4) ? .079 (2) .140 (3,56) .079 (2) .420 (10,67) .210 (5,33) .079 (2) .090 (2,29) .140 (3,56) .100 (2,54) .197 (5) .236 (6) .281 (7,14) 0.77 (19,5) .078.003 (1,980,07) .156 (3,96) .17 (4,3) ? .15748 (4) .118 (3) .140 (3,56) .157 (4) .210 (5,33) .420 (10,67) .157 (4) .090 (2,56) .281.003 (7,140,07) .140 (3,56) .100 (2,54) .197 (5) .276 (7) * x represents a variable part number. see page 17 for led details. 0.77 (19,5)
597-3xx1-507f 597-77x1-507f 597-3xx1-207f 597-77x1-207f part number drawing suggested led * itt k5v2 lighted tactile switch itt k5v2 lighted tactile switch 597-2751-607f 597-2712-607f 597-2723-607f 597-2751-607f 597-2712-607f 597-2723-607f 515-1140-195f 515-1149-145f 515-1151f 515-1154f 515-1061f 515-1094f 6 pcb mount multiple position vertical ?.240 (6,1 ) ?.157 (4) .767 (19,5) .315 (8) .050 (1,27) .035 (0,89) .065 (1,65) ?.200 (5.08) ?.240 (6,1 ) ?.118 (3 ) .315 (8 ) .065 (1,65 ) typ .035 (0,89) .570 (14,5) ?.197 (5 ) .423.010 (10,740,25) .138 ref (3,51) .056.003 (1,420,07) .223.003 (5,660,07) .059 (1,5) 1.029.010 (26,130,25) .135 3 .223.003 (5,660,07) .139.003 (3,540,07) .055 (1,4) .060 (1,52) .050 (1,27) .197 (5) .137 (3,48) .315 ref (8) .118 (3) led (ref) .020.010 (0,510,25) clearance led (ref) .020.010 (0,510,25) clearance .315.003 (80,07) 1.339.003 (340,07) 1.811 (46) .059 (1,5) .118 (3) .055 (1,4) .060 (1,52) .180 (4.57) .120 (3.05) ?.120.003 (3.050,07) typ; 2 plcs .200.005 (5.080,12) .100.005 (2.540,12) .360 (9.14) .110 (2,79) .090.010 (2.290,25) diffused front surfaces; 2 plcs .077 (1.96) ref alignment only pin .300.010 (7.620,25) .55 ref (13.9) .109 (2,77) ?.63 +.003 - .001 (1,6 +,008 ) - ,003 mounting pin ?.055.003 (1.40,07) .100.010 (2.540,25) .200.010 (5,080,25) .41 (10.3) .062 (1.57) ?.120.003 (3,050,07) typ; 2 plcs .180 (4,57) .120 (3,05) .200.005 (5,080,12) .360 (9,14) .100.005 (2,540,12) .110 (2,79) .090.010 (2,290,25) .235 (5,97) diffused front surfaces; 2 plcs .109 (2,77) .70 (17,9) ref .300.010 (7,620,25) alignment only pin ?.055.003 (1,40,07) .56 (14,3) .200.010 (5,080,25) .100.010 (2,540,25) .065 (1,65) ?.63 +.003 - .000 (1,6 +,008 ) - ,000 mounting pin * x represents a variable part number. see page 17 for led details.
part number drawing suggested led * 597-3xx1-507f 597-77x1-507f 597-3xx1-507f 597-77x1-507f 597-3xx1-507f 597-77x1-507f 597-3xx1-507f 597-77x1-507f 597-3xx1-507f 597-77x1-507f 597-3xx1-207f 597-77x1-207f 515-1114f 515-1108f 515-1064f 515-1064-801f 515-1009f 7 ?3.05.002 (,120) typ; 2 plcs 4.6 (0,18) 3.05 (0,120) *5.08.003 (,200) *2.54.003 (,100) 9.1 (0,36) 2.8 (.11) diffused front surfaces; 2 plcs *2.29.007 (,090) 4.85 (0,191) 4.6 (0,18) 17.8 (0,70) ref *7.62.007 (,300) 2.77 (,109) 1.65 (,065) .093 .009 alignment only pin 14.2 (0,56) *(.064.002 mounting pin (major dia.) *2.54.007 (,100) *5.0/8.007 (,200) .470 (11,94) .125 (3,18) .660 (16,76) .140 (3,56) .070 (1,78) pcb smt led .200 (5,08) .324 (8,23) .125 (3,18) typ .775 (19,69) .538 (13,67) .237 (6,02) (2) black lightshields see note 3 .215 (5,46) .175 (4,45) .175 (4,45) .950 (24,13) smt leds .195 (4,95) .195 (4,95) .203 (5,16) .140 (3,56) .040 (1,02) .098 (2,49) .170 (4,32) .170 (4,32) .150 (3,81) .090 (2,29) .16 (4,2) .090 (22,9) .54 (13,7) .528 (13,41) ?.098 (2,49) typ; (3 plcs) *.100.015 (2,540,381) .215 +.000 - .010 (5,46 +,000 ) - 0,25 .190.005 .21 (ref) .045 (max) .90 ?.098.005 typ; (3 plcs) (lightpipe front end) .90 (ref) .100 .54 (ref) .170.005 .170.005 .150.005 .215 .529.005 .110 typ .281 .195 .195 .202 .090 .125 .175 .300 .371 .200 gap .140 .515 .030 .128 max .655 (ref) .125 (typ); (3) places .206 (5,23) .190 (4,83) diffused front surfaces .100 (2,54) .850 (21,59) .585 (14,86) .528 (13,42) .215 (5,46) .170 (4,32) .170 (4,32) .150 (3,81) ?0.70 +.003/-.001 (1,78 +0,08/-0,03) diagonal 515-1064-804f .090 (2,28) * x represents a variable part number. see page 17 for led details.
597-3xx1-507f 597-77x1-507f 597-3xx1-507f 597-77x1-507f 597-3xx1-207f 597-77x1-207f 597-3xx1-507f 597-77x1-507f 597-3xx1-207f 597-77x1-207f part number drawing suggested led * 597-3xx1-507f 597-77x1-507f 597-3xx1-107f 597-77x1-107f 515-1064-807f 515-1023-803f 515-1090f 515-1090-801f 515-1052f 515-1078f 8 pcb mount multiple position horizontal ?.098 (2,49) .141 (3,58) .141 (3,58) .128 (3,25) .215 +.000 - .010 (5,46 +,008 ) - ,25 .528 (13,41) .100.015 (2,540,38) .90 (22,9) .125 (3,18) .030 (0,76) .125 sq. (3,18) typ. .851 (21,6) .070 (1,78) .200 (5,08) .324 (8,23) .470 (11,94) .195 (4,95) typ. .203 (5,16) ? led #1 .175 (4,45) .237 (6,02) .175 (4,45) .175 (4,45) 1.125 (28,58) .985 (25,02) .030 (0,76) lightshields .775 (19,69) .015 .075 .46 .228.005 ?.228.005 typ; 2 plcs .150 typ 2 plcs .437 .065 .114.003 .228.005 .11 .300 .800 .200 1.90 .389.010 .150 1.825 .093 p .c. board .47 (max) .228.005 ? .075.003 typ; 2 plcs .46 (ref) .060 .075 typ .150 typ 2 plcs .065 .114.003 .11 .228 .437 .355 .855 .200 1.95 (ref) .389.010 1.880 .150 p .c. board .47 (max) .093 ?.154 (3,91) typ 4 ?.090 (2,29) ?.154 (3,91) typ 4 ?.68 +.002 - .000 (1,73 +,005 ) - ,000 typ; 2 ?.065 (1,65) alignment pin .0100 (2,54) typ 2 .315 (8) (non- accum) typ. 2 5.69 (14,45) .315 (8) (non- accum) typ. 3 smd led typ. 4 pcb .062 thick .400 (10,16) 1.260 (32) .240 (6,11) .140 (3,56) .068 (1,73) 1.043 (26,49) .142 (3,59) .646 (16.41) led .015 - .020 (0,39 - 0,50) .900 (22,86) .040 (1,02) .535 (13,59) .090 (2,29) .350 (8,89) smd led typ. 3 led pcb .130 (3,3) .350 (8,89) typ .200 (15.08) typ. .100 (2,54) typ. .090 (2,29) typ. .100 (2,54) .600 (15,24) 2.100 (53,34) 2.030 (51,56) diffused output surface typ. 3 .150 (3,81) .300 (7,62) .580 (14,73) .015 - .020 (0,39 - 0,50) * x represents a variable part number. see page 17 for led details.
part number drawing suggested led * 597-3xx1-507f 597-77x1-507f 597-3xx1-507f 597-77x1-507f 597-3xx1-207f 597-77x1-207f 597-5111-407f 597-5202-407f 597-5311-407f 597-5411-407f 597-3xx1-507f 597-77x1-507f 597-3xx1-507f 597-77x1-507f 515-1070f 515-1022f 515-1045f 515-1086f 515-1062f 515-1063f 9 515-1063f 515-1062f .100 .750 .550 .120 .075 .144 .200 2 plcs leds .275 1.100 1.388 .300.006 .145 .140 .81 1.23 0.47 1.080 +.010 - .005 .062 .200 4 plcs .120 4 plcs 1.85 .100 .075 .275 1.100 .550 (typ) 1.23 .81 .550 +.050 - .008 .140 detail a 1.080 +.010 - .005 .062 .300.006 .100 typ 12 plcs .100 typ 12 plcs 1.73 .148 typ 11 plcs .030 (typ) .120 1.600 .014 .79 2.435 .410 .220 .320 .125 (typ) .040 (positions 1, 6, 7 & 12 only) .796.015 (20,220,12) .100.005 (2,540,12) 7 plcs typ .058 (1,47) .190.005 (4,83,012) .050 (1,27) .200.003 (5,080,17) typ 3 plcs ?.076 .005 (1,93 ,012) typ 8 plcs .125 (3,18) .230 (5,84) .170 (4,32) .120.010 (3,050,25) .040 (1,02) .125 (3,18) .045 (1,14) .316.010 (8,030,25) ?2.50 ?(,098) 16 plcs 1.60 (,063) 13.72 (,540) 13.72 (,540) 2.8 (,11) 10.2 (,40) 4.57 (,180) typ 7 plcs 1.27 (,050) sor mntg pins 6 plcs total diffused front surfaces 4.32 (,170) 3.81 (,150) 5.00 (,198) 8.00 (,315) 8.46 (,333) 515-1063f 2.5 (,10) diffused front surfaces 4.32 (,170) 3.81 (,150) 5.00 (,198) 8.00 (,315) 8.46 (,333) 515-1062f 2.5 (,10) ?2.50 ?(,098) 16 plcs 1.60 (,063) 13.72 (,540) 13.72 (,540) 2.8 (,11) 10.2 (,40) 4.57 (,180) typ 7 plcs 1.27 (,050) sor mntg pins 6 plcs total led (ref.) * x represents a variable part number. see page 17 for led details.
part number drawing suggested led * 597-5xxx-407f 597-3111-407f 597-3201-407f 597-3311-407f 597-3401-407f 597-3111-407f 597-3201-407f 597-3311-407f 597-3401-407f 597-3111-407f 597-3201-407f 597-3311-407f 597-3401-407f 597-3xx1-407f 597-3111-407f 597-3201-407f 597-3311-407f 597-3401-407f 598-8210-107f 515-1030f 515-1071f 515-1069f 515-1020f 515-1020-804f 515-1020-805f 10 1.75.02 (44.50,5) .050.008 (1,270,2) .48 (12,2) diffused front surface typ 4 plcs .46 (11,7) .34 (8,6) 45 ? x.015 chamfer typ 4 plcs .6 +.00 - .01 (1,5 +0.0 ) - ,02 .550 typ (13,97) non-accum .06 (1,5) ?.063 mounting pin typ 3 plcs .550 (13,97) typ 2.75 (6,99) ?.100 (2,54) typ .118.015 (30,38) .059 (1,5) .240 (6,1) .400 (10,16) .050.008 (1.270,2) .040.005 (1.020,2) .075 (1,91) .50 (12,7) .250.005 (6,350,12) .140 (3,56) typ .070 (1,78) typ ?.140 .005 (3,56 0,12) typ ?.079 .002 (2,01 0,05) typ .250 (6,35) .125 (3,18) .094.005 (2,390,12) .165 (4,19) .51 (13,1) .118 (3) .140 (3,56) .17 (4,4) led .074 (1,88) .640.008 (16,260,2) .250 (6,35) typ ?.140 (3,56) typ 3 plcs .165 (4,19) .094 (2,39) .250 (6,35) ? .079.002 press-fit pin typ 2 plcs .125 +.07 - .01 (3,18 +0.07 ) - 0,17 .342.010 (8,690,25) .118 (3) .514.008 (13,060,2) .074 (1,88) c.l. led #1 c.l. led .165 .094 ? .140 (typ) .250 (typ) .125 +.005 - .007 .142 (typ) .118 (3mm) detail a mounting pin #1 .250 (typ) .140 (note 2) ?.140 (3.56) .250 (6,35) .165 (4,19) .094 (2,39) .500 (12,7) .125 +.07 - .01 (3,18 +0.07 ) - 0,17 .640.010 (16,260,25) .342.010 (8,690,25) .514.010 (13,060,25) .074 (1,88) ? led ?.140 typ; 3 plcs ? led #1 .250 ? mounting pin #1 .094 .21 (ref) .118 typ .250 typ 2 plcs .125 +.005 / -.007 .140 * x represents a variable part number. see page 17 for led details.
part number drawing suggested led * 597-3xx1-407f 597-5x11-407f 597-5202-407f 598-8210-107f 597-3xx1-407f 597-5x11-407f 597-5202-407f 597-3xx1-407f 597-5x11-407f 597-5202-407f 598-8210-107f 597-3xx1-207f 597-77x1-207f 597-3xx1-207f 597-77x1-207f 597-3xx1-207f 597-77x1-207f 515-1020-806f 515-1048f 515-1048-801f 515-1037f 515-1010f 515-1051f 11 ?.140 (3,56) typ.4 .210 (5,33) .250 (6,35) typ. 2 .250 (6,35) typ. 3 .164 (4,17) .140 (3,56) typ.4 .125 +.00 - .01 (3,18 +0.12 ) - ,017 .094 (2,39) .140 (3,56) ? led .250 (typ. ) .142 (typ. ) .125 ?.140 (typ) .094 .13 .165 .342 .140 ? led ? led .074 (1,88) .140 (3,56) .094 (2,39) .250 .250 ?.140 (3,56) typ(4 plcs) .250 (6,35) typ (non- accum) .21 (5.3) .13 (3.3) .10 (2.5) .500 (12.7) .250 (6.35) .125 (3.17) ?.170 (typ); 4 plcs .375 pc board .800 .400 typ; 3plcs 1.37 .200 .46 ?.170 sqr (typ); 4 plcs 1.11 (ref) ? smt led .15 .240 front panel & wall not shown in this view ? ?.116 nom snap-fit mounting pins 2 plcs .575 .250 .345 .066 .085 ?.190; 3 plcs .095 .500 .500 .092 .050; 3 plcs .150; (typ) 3 plcs .075 (typ) .190; 3 plcs .155 .063 .03 .350 .450 front panel ?.079; 2 plcs .11 .350 .150 .090 .170 .300 .300 .200 2 plcs .130 2 plcs .045 .080 2 plcs * x represents a variable part number. see page 17 for led details.
part number drawing suggested led * 597-3xx1-507f 597-77x1-507f 597-3xx1-407f 597-3xx1-207f 597-77x1-207f 597-3xx1-207f 597-77x1-207f 597-3xx1-507f 597-77x1-507f 597-3xx1-507f 597-77x1-507f 597-3xx1-207f 597-77x1-207f 515-1093f 12 .275 .005 ?.069 .002 .268 (note 2) .063 ? led .125 .100 .197 .005 .056 typ 3 plcs .225 .005 .36 ref .040 .89 ref .096 .086 (typ) .196 (typ) +.000 / -.005 .33 .200 .400 .230 .137 .462 .100 ? leds .161 .18 .268.010 (6,810,25) .118 (3) .125 (3,18) .642.010 (16,310,25) .066 (1,68) .095 (2,41) .318 (8,08) .420 (10,67) .245 (6,22) ref .150 (3,81) typ .110 (2,79) .144 (3,66) .228.003 (5,790,07) .114 (2,9) .065.005 (1,650,12) .075 (1,91) .513 (13,03) .855 (21,72) .386 (9,79) .551 (13,98) .090 typ 2 plcs .120 typ 2 plcs .115 .075 .050 .310 2.048 .050 .063 (major dia) mounting pins typ 2 plcs .380 .065 .21 (ref) .74 (ref) .062 2.420.010 .220.007 typ; 11 plcs .079 dia (nom) mounting pins typ; 4 plcs 2.57 (ref) .080 typ 12 plcs .150 typ 12 plcs diffused front surfaces typ; 12 plcs .050 typ 12 plcs .100 typ 12 plcs .750 1.35 (ref) .692.007 .370 (ref) .140 .150 .047 1.162 ? leds .280 515-1005-801f 515-1029f 515-1000f 515-1118f 515-1110f ?.069 typ; 3 plcs * x represents a variable part number. see page 17 for led details.
part number drawing suggested led * 597-3xx1-507f 597-77x1-507f 597-3xx1-507f 597-77x1-507f 597-3xx1-207f 597-77x1-207f 597-3xx1-207f 597-77x1-207f 597-3xx1-507f 597-77x1-507f 13 .120 typ 8 plcs .090 typ 8 plcs 1.650 .115 .075 .050 .310 2.048 .050 .063 (major dia) mounting pins typ; 4 plcs .380 .065 .21 (ref) .075 typ .63 (ref) .130 .159 (max) .250 .500 diffused front surfaces .014 .157 .70 (ref) .308 .170 .170 .070 .062 .093 ?.063 (major dia) mounting pins typ; 4 plcs .740 515-1097f 515-1106f 515-1113f 515-1120f 515-1126f .122 typ .140 .080 .350 .272 .145 typ . .696 .348 .173 .880 ref r .150 .015 recess .300 .720 .380 .116 .075 .195 .270 .19pin diameters ? .166 +.002/-.000 typ 2 plcs .370.003 .162.003 ? .160 typ ? .190 typ .325 typ .740 .190 typ . .095 typ . .259 .354 .101 .101 .190 .075 .060 .288 .113 .023 .030 .065 .144 .114 .250 .200 1.700 r.100 r.160 * x represents a variable part number. see page 17 for led details.
14 597-2xx1-407f 597-2x01-207f 597-2xx1-407f 597-2x01-207f 597-3111-407f 597-3201-407f 597-3311-407f 597-3401-407f 597-6xx1-607f 597-77x3-607f 597-3xx1-207f 597-77x1-207f 597-3xx1-507f 597-77x1-507f part number drawing suggested led * 597-3xx1-507f 597-77x1-507f 597-3xx1-207f 597-77x1-207f 515-1132f 515-1143f 515-1027f 515-1016f 515-1004f 515-1047f panel mount single position .525 .380 .437 .075 .475 .125 .125 2.080 r.200 .177 (4,5) .640 (16,25) .177 (4,5) .094 (2,4) .110 (2,8) .158 (4,03) .354 (9) .010 (0,25) ?.118 (3) typ (4) .197 (5) .031 (0,8) .085 (2,15) typ (4) .089 (2,26) .325 (8,26) .066.002 (1,680,05) ?.072 +.002 - .010 (1,83 +,005 ) - ,00 ribs (3) @ 120 ?.064 +.000 - .005 (1,63 +,002 ) - ,012 ?.037 +.002 - .000 (0,94 +,005 ) - ,000 ribs for press-fit (3 plcs) .163 (4,14) ref .048 (1,22) .190 (4,83) .380 (9,65) reverse mount led .198.005 (5,020,12) .272.005 (6,910,12) reverse mount led pcb ultrasonic weld detail .050 (1,27) .298 (7,57) .098.005 (2,490,12) .194.005 (4,930,12) ?.250.007 3.75 diffused front surface .260 (6,6) * x represents a variable part number. see page 17 for led details.
15 521-9247f 521-9249f 521-9251f 597-3xx1-207f 597-77x1-207f 597-3xx1-507f 597-77x1-507f 521-9247f 521-9249f 521-9251f part number drawing suggested led * 597-3xx1-207f 597-77x1-207f 597-3xx1-207f 597-77x1-207f 597-3xx1-507f 597-77x1-507f 597-3xx1-207f 597-77x1-207f 521-9247f 521-9249f 521-9251f 515-1096f 515-1147f 515-1157f 515-1044f 515-1033f 515-1033-801f panel mount multiple position .040 (1,02) typ ?.163 (4,14) .105 (2,67) .060 (1,52) .210 (5,33) .150 (3,81) sq ?.150 (3,81) diffused front surface .210 (5,33) .120 (3,05) panel thickness or greater .090 (2,29) ref .290 (7,37) .030 (0,76) .150 (3,81) .097 (2,46) .062 thick pcb .147 (3,73) .217 (5,51) .020 (0,51) ?.120 (3,05) 3.785.010 (96,140,25) ?.188 +.002 - .005 (4,78 +,005 ) - ,012 .140 ref ?.140 ref .103 ref .060 ref .65 ref .095 ref .21 ref .610 ref ? leds ?5.00mm cbi (dialight p/n: 550-3509-801f .300 max .150 2.49 2.08 ref 1.90 .475 .482 2.070 2.20 ref .185 pcb 2.78 ref .250 .110 .06 typ .039 typ .110 .75 typ .024.008 .18 typ 2 plcs .550.008 .07 ?.126.008 2 plcs ?.200 2 plcs .17 .36.03 (9,010.7) .024 (0,61) .18 (4,6) .110 (2,79) .039 (0,99) .07 (1,8) ?.200 (5,08) ?.126 (3,2) .17 (4,4) * x represents a variable part number. see page 17 for led details.
16 recommended micro led ? surface mount leds dialight part number color material dom . typ. (nm) intensity typ. (mcd) forward voltage typ. (v) viewing angle (deg.) height (mm) test current (ma) type 1206 series package (3.2mm x 1.6 x height) reverse mount 597-6001-607f red alingap 631 150 2.0 70 1.1 20 single color 597-6201-607f orange alingap 605 260 2.0 70 1.1 20 single color 597-6301-607f green ingan 525 410 3.0 70 1.1 20 single color 597-6401-607f yellow alingap 587 240 2.0 70 1.1 20 single color 597-6501-607f yellow-green alingap 572 104 2.2 70 1.1 20 single color 597-6601-607f blue ingan 470 112 3.0 70 1.1 20 single color 597-6901-607f white ingan x .304,y.301 70 3 70 1.1 5 single color 597-7703-607f red/green alingap 631/571 55/45 2.0 130 1.1 20 bi-color 597-7783-607f red/blue alingap/ingan 631/470 45/45 2.0/3.3 130 1.1 20 bi-color 5mm through hole leds 521-9247f red - 635 60 2.6 35 5 10 single color 521-9249f yellow - 588 90 2.1 16 5 20 single color 521-9251f green - 565 70 2.7 24 5 10 single color part number drawing suggested led * 597-3xx1-207f 597-77x1-207f 597-3xx1-507f 597-77x1-507f 597-3xx1-207f 597-77x1-207f 597-3xx1-507f 597-77x1-507f 597-3xx1-207f 597-77x1-207f 597-3xx1-507f 597-77x1-507f 597-3xx1-507f 597-77x1-507f 515-1040f 515-1046f 515-1133f 515-1156f .91 (ref) ?.156 typ 4 plcs .070 typ (ref) .090 typ 3 plcs .405 4 plcs .128 typ ref 3 plcs .050 .025 .250 .500 .750 ?.080 45 ? typ ref .218 r .045 r .008 (ref) .047 .128.003 typ 4 plcs .67 .495 1.98 .375.005 typ 5 plcs .250 typ 6 plcs .100 typ 6 plcs .278.003 typ 4 plcs .070 typ .060 .380 .090 .486 ? leds .500 (12,7) .375.002 (9,530,05) .078 (1,98) .130 (3,3) .156 (3,96) .750.002 (19,050,05) .040 (1,02) 4 plcs .118 (3) 2 plcs .375 (9,53) .170 (4,32) .125 (3,18) .155 (3,94) .090 (2,29) .704 ref .103 ref .060 ref curved 3 diffused front surfaces ?.134 +.002 - .001 ?.120 typ .065 ref ? led ? led .664 ref .364 ref ?.116 .002 (2,950,05) * x represents a variable part number. see page 17 for led details.
recommended micro led ? surface mount leds chipled dialight part number color material dom . typ. (nm) intensity typ. (mcd) forward voltage typ. (v) viewing angle (deg.) height (mm) test current (ma) type 0603 series package (1.6mm x 0.8mm x height) 597-5004-407f red allngap 626 50 1.9 152 0.7 20 single color 597-5112-407f red algaas 647 11.7 1.7 152 0.7 20 single color 597-5203-407f orange gaasp 606 3.4 2.2 152 0.7 20 single color 597-5213-407f orange allngap 605 65 1.9 152 0.7 20 single color 597-5223-407f yellow allngap 590 65 1.9 152 0.7 20 single color 597-5312-407f green gap 567 6.4 2.1 152 0.7 20 single color 597-5412-407f yellow-green gap 572 11.7 2.1 152 0.7 20 single color 0805 series package (2.0mm x 1.25mm x height) 597-5111-407f red algaas 647 11.7 1.7 150 0.8 20 single color 597-5202-407f orange gap 606 3.7 2.2 150 0.8 20 single color 597-5311-407f green gap 567 6.4 2.1 150 0.8 20 single color 597-5411-407f yellow gap 572 11.7 2.1 150 0.8 20 single color 1206 series package (3.2mm x 1.6mm x height) 598-8210-107f red alingap 635 40 2.2 140 0.7 20 single color 1206 series package with lens (3.0mm x 1.6mm x height) 597-3111-407f red gaaias 647 33.6 1.7 70 1.5 20 single color 597-3201-407f orange gaasp/gap 606 9 2.2 70 1.5 20 single color 597-3311-407f green gap 567 12 2.1 70 1.5 20 single color 597-3401-407f yellow gaasp 590 6 2.2 70 1.5 20 single color 597-3021-407f red alingap 626 240 1.9 60 1.5 20 single color 597-3003-407f red allngap 626 50 1.9 150 0.8 20 single color 597-3212-407f orange allngap 605 65 1.9 150 0.8 20 single color 597-3222-407f amber allngap 590 65 1.9 150 0.8 20 single color 597-3612-407f blue ingan 470 133 3.3 50 1.5 20 single color 597-3325-407f green ingan 525 415 3.3 50 1.5 20 single color 597-3312-407f green alingap 561 42 2.1 60 1.5 20 single color 597-3202-407f orange alingap 605 240 1.9 60 1.5 20 single color 1208 series package (3.0mm x 2.0mm x height) 597-2111-407f red gaaias 647 12.4 1.7 130 1 20 single color 597-2201-407f amber gaasp/gap 606 3 2.2 130 1 20 single color 597-2311-407f green gap 567 5.2 2.1 130 1 20 single color 597-2401-407f yellow gaasp/gap 590 3 2.2 130 1 20 single color 597-2712-607f red/ green/ blue alingap/ ingan/ ingan 624/ 525/ 470 110/ 280/ 100 2/ 3.5/ 3.5 130 1 20 tri-color 597-2751-607f red/green alingap 631/571 45/35 2 130 1 20 bi-color 597-2723-607f yellow/green alingap 589/571 75/35 2.0 130 1 20 bi-color 1208 series package with reflector (3.0mm x 3.0mm x height) 597-3021-507f red gaasp 653 6.3 2 110 1.3 20 single color 597-3111-507f red algaas 662 16 1.75 110 1.3 20 single color 597-3211-507f orange gaasp 612 10 2 110 1.3 20 single color 597-3301-507f green alingap 573 25 2.2 110 1.3 20 single color 597-3401-507f yellow gaasp 588 6.3 2.1 110 1.3 20 single color plcc-2 series package with reflector (3.5mm x 2.8mm x height) 597-3001-207f red gaasp/gap 620 10 2 120 1.9 20 single color 597-3121-207f red algaas 645 35.5 1.75 120 1.9 10 single color 597-3211-207f orange gaasp/gap 606 18.3 2 120 1.9 10 single color 597-3301-207f green gaasp/gap 570 19.6 2 120 1.9 10 single color 597-3401-207f yellow gaasp/gap 587 12.6 2 120 1.9 10 single color 597-3601-207f blue ingan 465 11 3.5 120 1.9 10 single color 597-3231-207f yellow allngap 587 100 2 120 1.9 20 single color 597-3901-207f white ingan x: 0.32 y: 0.31 135 3.5 120 1.9 20 single color 597-7701-207f red/green gaasp/gap 628/570 11.3/11.3 2 120 1.9 10 bi-color 597-7721-207f yellow/green gap/gaasp 590/570 16/16 2.1/2.0 120 1.9 20 bi-color 597-7731-207f red/yellow gaaip 628/590 10.5/10.5 2.0/2.0 120 1.9 10 bi-color 597-7741-207F orange/green gaasp/gap 606/570 11.3/17.6 2 120 1.9 10 bi-color 597-7761-207f orange/green gaasp/gap 605/557 11.3/17.6 2 120 1.9 10 bi-color 597-7781-207f red/blue ingaaip/gan 633/467 45/11 2.0/3.5 120 1.9 10 bi-color 17
optopipe ? lightpipe actuator extensions features & benefits: w fits c&k k5v2 illuminated led switch w available in 3mm and 4mm diameters w variable length from 10mm to 25mm w rohs compliant w custom color options available (consult factory) w custom length options available (consult factory) w opaque colors available for use with c&k k5v2 nonilluminated switches part numbers: 4mm diameter part number length 515-1140-100f 10mm 515-1140-120f 12mm 515-1140-125f 12.5mm 515-1140-130f 13mm 515-1140-195f 19.5mm 515-1140-225f 22.5mm 515-1140-235f 23.5mm 515-1140-250f 25mm part numbers: 3mm diameter order code 515-114 x - xxx -f length in (mm) l (see notes) .177 (4.5 ) .315 (8 ) itt/connon k5v switch (ref. only) .065 (1,65 ) .035 (0,89 ) support permissible .010 max (4plcs) .050 (1,27 ) r.010 (0,25 ) ?.200 (5,08 ) ?.157 (4 ) ?.240 (6.1 ) ?.240 (6.1 ) ?.118 (3 ) l (see notes) 3.15 (8 ) .177 (4,5 ) itt/connon k5v switch (ref. only) ?.197 (5 ) .065 (1,65 ) typ .035 (0,89 ) support permissible .010 max (4plcs) part number length 515-1149-145f 14.5mm application dialight optopipe ? actuator extensions are designed for use with c&k k5v2 lighted tactile switches. these snap-in clear lenses do not need to sit on the edge of a pcb and is offered in a verity of sizes to accommodate a range of panel depths. dialight optopipe? actu- ator extensions are ideal for server, storage, network infrastructure, au- tomotive, and medical applications. diameter (mm) ?.240 (6.1 ) ?.118 (3 ) ?.157 (4 ) ?.240 (6.1 ) 18 new!
through hole cbi ? circuit board indicators w housed leds in variety of configurations including: right angle, vertical & horizontal ganged arrays in single bi, tri, and quad blocks w 2mm, 3mm & 5mm w perfect for direct view or backlighting applications w variety of colors and led types including: single & bi-color, diffused, water-clear, tinted, super-bright, & high efficiency w over 2,500 variations, with custom led placement available w rohs compliant cbi ? selector guide www.dialight.com/assets/brochures_and_catalogs/indication/cbi_selector_guide.pdf other opto electronic products offered by dialight based led bulbs 585 & 586 series led panel mount indicators w replaces traditional miniature incandescent bulbs with rugged long-lasting and energy-efficient leds w design incorporates the most common base styles including: t 1 ? midget flange, wedge base and bi-pin, t 3 ? mini-bayonet and mini-screw, t2 telephone slide and 15 mm bayonet w voltages from 6, 14 and 28 vdc, 6-36 vdc multi-voltage operation and 125 vac with non-polarized versions available w colors include C red, green, yellow, blue and white w check dialights incandescent / based led cross reference for our specific replacement part number based led selector guide http://www.dialight.com/assets/brochures_and_catalogs/indication/based_led_selector_guide.pdf w incorporating the latest led technology in a tamper-proof enclosure w variety of sizes from .156 C 1 w operating voltages 2-28 vdc, 125 and 230 vac w some feature a water-tight seal to nema 4x / ip66 w available in red, green, yellow, orange, blue, cyan and white w 556 series is ul recognized, class 1, div. ii certified versions available w relampable data lamp series is available w most use lock washer and nut for secure mounting led panel mount indicator selector guide www.dialight.com/assets/brochures_and_catalogs/indication/ver-5x0x.pdf 40 years of led experience prism ? series right angle smt w surface mountable solution with integrated optics w 2mm & 3mm leds w tape and reel / pick and place compatible w can withstand higher temp rohs solder process and eliminates need for secondary optics or separate process w available with square or round lens, and also in low current version w packaged in single, bi & tri level configurations w rohs compliant cbi ? selector guide http://www.dialight.com/assets/brochures_and_catalogs/indication/smt_selector_guide.pdf 19
dialight reserves the right to make changes at any time in order to supply the best product possible. the most current version of this document will al- ways be available at: www.dialight.com/assets/brochures_and_catalogs/indication/lightpipe_selector_guide.pdf

▲Up To Search▲

Price & Availability of 597-7741-207F

	To Download 597-7741-207F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .